exterior correction services

Decon foaming wash

Most important is paying special attention to the details. Therefore, we prepare the surface 100% properly to achieve the best possible results all the while doing so with the least possible damage in the process. Our Hi-Line Decon Foaming Wash is included in every paint correction and ceramic coating option.

Every decontamination wash will strip all protection. Therfore we always finish off our service with a protectant such as a ceramic coating or a ceramic sealants. Our installer will leave you with instructions for maintenance and washing instructions. Our goal is to deliver lasting results that will make you smile.

    • Pre Rinse - Encapsulate the dirt and grime

    • Decon Foam & Rinse - Apply a specialized heavy decon specific foam to the surface - dwell - rinse.

    • Clean Wheels, Barrels, Tires & Wheel Wells - Degrease, Foam, Iron & Mineral Removal.

    • PH Neutral Foam and Contact Wash & Rinse - Apply a PH neutral foam and deep clean all exterior surfaces.

    • Badge, Edge, and Trim Detail Clean - Deep cleaning intricate areas of the exterior paint, plastic & chrome.

    • Clay Decontamination - Using a clay bar/mitt/rag to remove embeded contamenants from the exterior surfaces.

    • Iron Removal - Remove Iron contaminants that embed into the pores of the surfaces of the vehicle.

    • Mineral Removal - Remove Mineral contaminants that remain on the surfaces of the vehicle.

    • Clean Door Jams & Dry Vehicle - Finish off with cleaning the door jams and drying the vehicle.

Machine Work

Paint correction is achieved through the process of using a machine polisher with various pad types, compounds, and polishes. The work will remove or greatly reduce blemishes in the vehicle’s finish such as swirl marks, oxidation, fine scratches, holograms, stains, and water spot etching. Whether its using a rotary polisher, dual action polisher or forced rotation dual action polisher we have the know how for obtaining the best results.

  • Paint enhancement will reduce the visibility of swirl marks, scratches, oxidation, and other defects by creating a smoother and glossier surface. This process is completed in one step and is less aggressive than paint correction. This is the safest route for the longevity of the clear coat paint protection on your vehicle. Paint enhancement removes very little clear coat from the paint surface. Paint enhancement is usually recommended for newer cars with minimal paint damage.

  • A 2-step polishing process may be needed to restore paint that has heavy defects. First, we begin with an aggressive polish or compound teamed up with a cutting pad. The second step utilizes a finishing polish and finishing pad to remove any haze, marring and/or swirls leftover in the paint from the first step. The second step is a necessary refinement of the finish.

  • Usually an add on to a paint enhancement or correction. An additional trip around the vehicle with a specialized pad and product combo to add increased clarity and depth for the ultimate depth of gloss and wet look.

  • Same 2 step correction service as above. Typically added onto a paint enhancement when there is a very specific spot that has heavier damage than the rest of the vehicle. example.. your kids backpack brushed against the vehicle as they walked next to it and left 4 - 2” long scratches randomly along 2 separate panels.

  • Same 2 step correction service as above. Typically added onto a paint enhancement when one area has heavier damage than the rest of the vehicle. example.. one side of the vehicle has been driven across a pine bush and created heavier damage across the entire one side of the vehicle.

  • This is the process of lightly wet sanding the finish of the clear coat. Wet sanding using clean water, a soft block, and using fine grit sandpapers anywhere from 400 to 3000 grit. We are using this technique to reduce scratches and remove tiny imperfections before compounding and polishing.

machine work add on’s

road rash correction

Unfortunately all of our vehicles obtain damage due to daily driving. Whether you have just a few small paint chips on the front end or have a vehicle smattered with thousands of these paint chips... we have a solution for you. The Hi-Line Road Rash Correction offers a non intrusive, permanent and trusted process that delivers serious results. Read more below about the variations of scratch repair that can be paired with the Hi-Line Road Rash Correction process. We offer the very best options for a full reconditioning of your vehicle

  • Our company has built a strong reputation on providing our signature process to dealerships for 20+ years. This proprietary process matches the oem color of your vehicle with high quality paint. The Hi-Line Road Rash Correction is second to none in the permanent quality of chip repair. This process can also affectively diminish the appearance of light scratches on the vehicle. Most vehicles see a drastic improvement that is worth thousands for a fraction of the cost and completed in under 2 hours.

  • Better than touch up is our unique Road Rash Correction service. However, there are situations that will require touch up and we know how to get the job done right. No big ugly dab marks. No dots that dont match. The whole point is to make it look like it was never damaged in the first place. Let us help your vehicle by touching it up properly.

additional  services

  • The plastic & vinyl trim of a vehicle is prone to premature discoloration due to UV rays, cleaning detergents, and oxidation. Most plastic and vinyl trim restoring products on the market are made from oils and silicone that just cover the problem and ultimately cause more damage over time. Whether it's forcing the oils back into the plastics, dyeing the trim or applying a protctive ceramic coating.. We have a solution for you.

  • Headlights are made of a polycarbonate resin plastic that are susceptible to rock chip damage and uv light damage. Over time this damage causes haze & yellowing that affects the look of your vehicle. This can also cause a safety issue by having less visibility at night. Have no fear, we can bring the life back into your headlights. There are many methods offered in the market but only one true method that lasts… remove oxidation, polish out sanding marks and then finish with a new coat of clear. Save the $600-$1500 dollar cost of replacing a headlight and call us today.

Book your free consultation

Book your free consultation

Schedule Now

Contact us

Interested in our process? Fill out some info and we will be in touch shortly. We can’t wait to hear from you!